Building waterproofing membrane industry access conditions for the development of the industry to guide the construction of waterproof material industry, to curb overcapacity and redundant construction, speed up industrial restructuring, according to the people's Republic of China on the quality of the promotion law, the people's Republic of China and other relevant laws and regulations and industrial policies to develop the access conditions.
The access conditions referred to in waterproofing Juancai construction refers to the modification of asphalt (including self-adhesive) waterproofing membrane and polyvinyl chloride (PVC) and thermoplastic polyolefin (TPO) polymer waterproofing membrane.
One, construction conditions and production layout
(a) new and expanded building waterproofing membrane project should be in line with national industrial policy and industrial planning, local industrial planning, land use overall planning, etc., to co-ordinate resources, energy, environment, logistics and market factors such as reasonable layout. "Twelfth Five Year" period, based on domestic demand, strict control incremental, focusing on optimizing the stock, focus on adjusting the structure, promoting mergers and acquisitions, improve industrial concentration and scale efficiency.
(two) in the area of scenic spots, ecological protection zones, natural and cultural heritage protection zones, drinking water source protection zones, urban built-up areas and non industrial planning areas, new and expanded construction waterproofing membranes are prohibited. The area has been put into operation of construction waterproofing membrane project, did not meet the requirements of the access requirements, should be achieved by the end of 2015 to achieve. The new (including relocation) construction projects should enter the industrial park or have the corresponding pollution control ability of industrial agglomeration area.
Two, production scale, technology and equipment
A new modified asphalt (including self-adhesive) scale of single capacity of waterproofing projects of not less than 10 million square meters / year (as in the product standard of minimum thickness of products, 250 days / year, 16 hours / Tianyun meter, the same below). New polymer waterproofing membrane (PVC, TPO) project single line capacity of not less than 3000000 square meters / year.
(II) new waterproofing Juancai construction projects using advanced automation control system, the production process and the key equipment should meet the following basic requirements: 1. Change of asphalt (including self-adhesive) waterproofing membrane production line colloid mill total flow rate of not less than 40 cubic meters / hour. 2 PVC (PVC) waterproofing membrane production line of no less than 1200 kg / h, thermoplastic polyolefin (TPO) waterproof membrane production line, the total extrusion capacity of not less than 1000 kg / h.
(three) the construction of new and expansion projects in the investigation, design, construction, supervision and other units should have the appropriate level of qualification.
Three, energy consumption
(a) the amount of energy consumed by the waterproofing membrane unit shall be in accordance with the following provisions. Product name unit product comprehensive energy consumption limit access value (kg / m2) of asphalt based waterproofing membrane has no more than 0.20 of the tire is not less than 0.10 (PVC) waterproof material is not higher than 0.08 thermoplastic polyolefin (TPO) waterproof coiled material is not higher than 0.08
(two) the annual consumption of 5000 tons of standard coal and more than the construction of waterproofing membrane production enterprises, should be submitted annually, including energy consumption, energy use efficiency, energy saving and energy efficiency analysis, energy efficiency analysis, energy saving measures and so on.
Four, environmental protection
(a) the raw materials that are easy to produce smoke, dust and other pollutants in the process of transportation, loading and unloading, storage and use shall be sealed in the process of. Modified asphalt (including self-adhesive) asphalt waterproof coiled material mixing tank, oil immersion pool and oiled pool should be configured to asphalt flue gas processing device. Emissions of gases in accordance with the GB 16297 "integrated emission standards for air pollution" or the requirements of the project's environmental standards.
(two) solid waste shall be collected, stored and used in accordance with the provisions of the regulations; the implementation of rain and sewage diversion, sewage diversion, cooling water recycling, and the production of waste water are collected and treated.
(three) improve the noise prevention and control measures, the noise of the factory is in line with the provisions of the GB 12348 "noise emission standards for industrial enterprises".
(four) to adopt cleaner production technology to carry out cleaner production audit. Establish environmental management system, develop environmental emergency plan. Supporting the construction of environmental protection facilities and the main project at the same time, while the construction, and put into use.
Five, product quality
(a) waterproof coiled material enterprises in accordance with the JC/T 1072 "waterproof roll roofing production enterprise quality management procedures" sound management system.
(two) the quality of the product is in line with the relevant national standards or industry standards.
(three) with the capacity of finished product inspection and raw material inspection, the establishment of quality management system, product quality comparison verification and the internal inspection system. The establishment of product traceability system and warehouse ledger.
Six, safety production, occupational health and social responsibility
(a) to establish and improve the responsibility system for safety production, occupational disease prevention and control, formulate a comprehensive safety production rules and regulations and operating procedures, with the provisions of the occupational disease prevention and control facilities.
(two) the safety and safety facilities and occupational disease prevention facilities and occupational disease prevention facilities for new and expanded projects shall be designed, constructed and put into use at the same time as the main body.
(three) there is a major risk source detection, assessment, monitoring measures and contingency plans.
(IV) does not tax evasion, wage arrears, on schedule and in full and pay endowment insurance, medical insurance, industrial injury insurance, unemployment insurance, maternity insurance and housing provident fund.
(five) the establishment of occupational health and safety management system.