CPE waterproofing membrane (S type)

Category: Polymer waterproofing membrane system

key word: Polymer waterproofing membrane system

Contact Phone:

+86-532-66723991

Inquiry Return to List

Product Details

Chlorinated polyethylene (CPE) waterproof membrane

★ Product overview

Chlorinated polyethylene waterproofing membrane developed by our factory, the production of a new type of high strength road and bridge special polymer waterproofing membrane, this product is based on chlorinated polyethylene as the base material, adding modifier, anti-aging agent, accelerator and some other reinforcing agent, after mixing rolling double-sided composite. It has the comprehensive characteristics of large tension, high resilience, oil resistance, flame retardancy, weather resistance and long service life. The product is cold construction type waterproof material, construction operation is convenient, and is not limited by climatic conditions.

★ Product Specifications

Thickness: 1.2mm 1.5mm 1.8mm 2.0mm

Width: 1.0-2.5 m Length:10 -50m

Note: can be customized according to customer needs.

Product form: homogeneous sheet embossing (category N), composite sheet (LClass).

Class NLClass

Remarks：

homogeneous sheet

No composite layer of the coil, simply said isWithout non-woven fabricofWaterproof board, markedNClass.

CompositeThere arecomposite fabricWaterproofing membrane for protective layer or reinforced layer. The composite fabric is the outer protective layer markedLClass (I. e., the middle is a waterproof board, and the outside is a non-woven fabric).

★ Product PerformancePhysical Properties

According to the standard

High-speed rail standardsTB/T 2965-2011GB 12953-2003

concrete railway bridge deckTechnical conditions for TQF-I type waterproof layer TB/T 2965- 1999

chlorinated polyethylene waterproofing membranePerformance indicators (Type N)

Serial Number	Inspection Items		Quality Index
			GB/T 12953-2003			TQF-1 type	TB/T 2965-2011
			Type I		Type II
1	Tensile strength MPa		≥ 5.0		≥ 8.0	≥ 5.0	≥ 12MPa
2	Elongation at break%		≥ 200		≥ 300	≥ 100	≥ 550%
3	Heat treatment dimensional change%		3.0		Longitudinal: ≤ 2.5 Transverse: ≤ 1.5	≤ 3.0	Longitudinal: ≤ 2.5%
							Horizontal: ≤ 1.5%
4	impervious to water		impervious to water			impervious to water	impervious to water
5	Low temperature bending		No crack at -20 ℃	No crack at -25 ℃		No crack at -30 ℃	No crack at -35 ℃
6	resistance to perforation		No water seepage			impervious to water	No water seepage
7	shear state Adhesion (N/mm)		≥3.0 or coil damage			≥2.0	≥ 3.0N/mm or coil damage
8	Heat aging treatment	Appearance	No blisters, cracks, bonds and holes			No bubbles, scars, cracks, bonds, holes	No bubbles, scars, cracks, bonds, holes
		Change rate of tensile strength/%	50 -20		±20	50 -20	≥ ± 20
		Change rate of elongation at break/%	50 -30		±20	50 -30	≥ ± 20
		Low temperature bending	No crack at -15 ℃		No crack at -20 ℃	No crack at -20 ℃	No crack at -25 ℃

Performance index of chlorinated polyethylene double-sided reinforced waterproofing membrane (L)

Serial Number	Inspection Items		Quality Index
			GB/T 12953-2003			TB/T 2965-2011
			Type I		Type II
1	Tensile force (N/cm)		≥70		≥ 120	≥ 160
2	Elongation at break/%		≥ 125		≥ 250	≥ 550%
3	Dimensional change rate of heat treatment/%		≤ 1.0			Longitudinal: ≤ 1.0%
						Horizontal: ≤ 1.0%
4	impervious to water		impervious to water			impervious to water
5	Low temperature bending		No crack at -20 ℃	No crack at -25 ℃		No crack at -35 ℃
6	resistance to perforation		No water seepage			No water seepage
7	shear state Adhesion (N/mm)		≥ 3.0 n/mm or coil damage			≥ 3.0N/mm or coil damage
8	Heat aging treatment	Appearance	No blisters, cracks, bonds and holes			No bubbles, scars, cracks, bonds, holes
		Tensile force (N/cm)	≥ 55		≥ 100	≥ 150 n/cm
		Elongation at break/%	≥ 100		≥ 200	≥ 450%
		Low temperature bending	No crack at -15 ℃		No crack at -20 ℃	No crack at -25 ℃
9	Resistance to chemical attack	Tensile force (N/cm)	≥ 55		≥ 100	≥ 150 n/cm
		Tensile rate at break/%	≥ 100		≥ 200	≥ 450%
		Low temperature bending	No crack at -15 ℃		No crack at -20 ℃	No crack at -25 ℃

★ Product application range Application Range

This product is suitableRoof, basement, reservoir, pool, sewage treatment system, civil air defense engineering and channel of various industrial and civil buildings, beam plant and other waterproof works. Especially suitable for highways, railways and culverts,Waterproof and anti-seepage works such as bridge concrete deck.

Hot Products